1995 Standard Specifications Book
Last Update (11/05/2003)
Click here to return to Index Page
DIVISION VI - LIGHTING AND SIGNING
(Items 660 to 688)
Table Of Contents
ITEM NO. - TITLE AND REQUIREMENTS
660 - WINGED CHANNEL POSTS
SPECIFICATION REQUIREMENTS
1) Locations for installing the winged channel posts must be shown on
the plans.
2) The length and mass of the winged channel post must be shown on the
plans.
3) Winged channel posts will be installed such that the reflector units
and/or reflectorized
panels will be at the height shown on the plans.
4) The minimum embedment depth for the winged channel posts must be
shown on the plans.
5) This is a plans quantity measurement Item.
OPTIONAL REQUIREMENTS
1) When required, galvanizing will be in accordance with Item 445.
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Winged Channel Posts (Length Specified) (Mass
Specified)" |
EA |
REFERENCE ITEMS
None
Go to Top
662 - WORK ZONE PAVEMENT MARKINGS
SPECIFICATION REQUIREMENTS
1) The location and placement of work zone pavement markings must be
shown on the plans
for all roadways to be opened to traffic during
construction.
2) The description specifying the type, color (white or yellow) and
widths of the work zone
pavement markings must be shown on the plans.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Work Zone Pavement Markings (Removable) (White or
Yellow) (Type Specified) |
|
|
(Width Specified)" |
M, EA |
2) |
"Work Zone Pavement Markings (Non-removable) (White
or Yellow) (Type Specified) |
|
|
(Width Specified)" |
M, EA |
3) |
"Work Zone Pavement Markings (Short Term) (White or
Yellow) (Type Specified) |
|
|
(Width Specified)" |
M, EA |
4) |
"Work Zone Pavement Markings (Guidemark) (White or
Yellow)" |
M, EA |
REFERENCE ITEMS
(666, 672)
Go to Top
666 - REFLECTORIZED PAVEMENT MARKINGS
SPECIFICATION REQUIREMENTS
1) The location and placement of reflectorized pavement markings must be
shown on the plans.
2) The description specifying the type, color (white or yellow), shapes,
sizes, widths and
thickness of the reflectorized pavement markings must
be shown on the plans.
3) Guides to mark the lateral location of pavement markings will be
established as shown on
the plans or as directed by the Engineer.
4) Where double stripes are placed, each stripe will be measured
separately.
5) This is a plans quantity measurement Item.
OPTIONAL REQUIREMENTS
1) When required, markings placed that are not in alignment or sequence,
as shown on the
plans or as stated in this specification, shall be removed at
the Contractors expense and
in accordance with Item 677.
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Reflectorized Pavement Markings (White or Yellow) (Specify the
Type, Shape, |
|
|
Size and/or Width) (Specify Thickness for Type I Markings only)" |
M, EA |
REFERENCE ITEMS
None
Go to Top
668 - PREFABRICATED PAVEMENT MARKINGS
SPECIFICATION REQUIREMENTS
1) The location and placement of prefabricated pavement markings must be
shown on the plans.
2) The descriptions specifying the types, colors, shapes and sizes of
prefabricated pavement
markings must be shown on the plans.
3) Guides to mark the lateral location of prefabricated pavement
markings will be established as
shown on the plans or as directed by the Engineer.
4) This is a plans quantity measurement Item.
OPTIONAL REQUIREMENTS
1) When required, blast cleaning shall be done in accordance with Item
678.
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Prefabricated Pavement Markings (White or Yellow)
(Specify the Type, |
|
|
Shape and/or Size)" |
M, EA |
REFERENCE ITEMS
None
Go to Top
672 - RAISED PAVEMENT MARKERS
SPECIFICATION REQUIREMENTS
1) The location and placement of raised pavement markers must be shown
on the plans.
2) The types and classes of raised pavement markers must be shown on the
plans.
3) Guides to mark the lateral location of raised pavement markers will
be established as shown
on the plans or as directed by the Engineer.
4) This is a plans quantity measurement Item.
OPTIONAL REQUIREMENTS
1) When required, markings placed that are not in alignment or sequence,
as shown on the plans
or as stated in this specification, shall be removed at the
Contractor's expense and in
accordance with Item 677.
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Raised Pavement Markers (Class Specified) (Type Specified)"
|
EA |
REFERENCE ITEMS
(5381)
Go to Top
677 - ELIMINATING EXISTING PAVEMENT MARKINGS
AND MARKERS
SPECIFICATION REQUIREMENTS
1) The elimination of the existing pavement markings of the various
types and sizes, and
raised pavement markers will be shown on plans or as
directed, in writing, by the Engineer.
2) Asphalt and aggregate types and grades will be as shown on plans or
as approved in
writing by the Engineer.
3) This is a plans quantity measurement Item.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Eliminating Existing Pavement Markings and Markers (Type
Specified)" |
M, M2, EA |
REFERENCE ITEMS
(300, 302, 316, 678)
Go to Top
678 - PAVEMENT SURFACE PREPARATION FOR MARKINGS
SPECIFICATION REQUIREMENTS
1) The location of the pavement surface areas to be prepared for the
pavement surface
preparation for pavement markings or raised pavement markers
must be shown on the plans.
2) This is a plans quantity measurement Item.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Pavement Surface Preparation for Markings (Type
Specified)" |
M, EA |
REFERENCE ITEMS
None
Go to Top
680 - INSTALLATION OF HIGHWAY TRAFFIC SIGNALS
SPECIFICATION REQUIREMENTS
1) The locations and the details of the installation of the highway
traffic signals must
be shown on the plans.
2) The details of the controller assemblies must be shown on the plans.
3) The details of the flasher assemblies must be shown on the plans.
4) Materials not provided by the utility company for the electrical
services will be supplied
and installed by the contractor as shown on the plans.
5) The types, sizes and lengths of conduits and fittings must be shown
on the plans.
6) Sign lighting attached to traffic signal equipment will be as shown
on the plans.
7) Luminaires on signal poles will be as shown on the plans.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Installation of Highway Traffic Signals (Type
Specified)" |
EA |
REFERENCE ITEMS
(610, 625, 627, 634, 636, 6000, 6001, 6002, 6003, 6004, 6005, 6007,
6008, 6010, 6023)
Go to Top
681 - TEMPORARY TRAFFIC SIGNALS FOR
CONSTRUCTION
SPECIFICATION REQUIREMENTS
1) The locations and details for installing, operating, maintaining,
reconfiguring and
removing temporary traffic signals for controlling
traffic during construction must be
shown on the plans.
2) Any signal equipment furnished by the department will be picked up by
the contractor
at locations shown on the plans.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Temporary Traffic Signals for Construction" |
EA |
REFERENCE ITEMS
(680)
Go to Top
682 - VEHICLE AND PEDESTRIAN SIGNAL HEADS
SPECIFICATION REQUIREMENTS
1) The types, sizes and details for installing vehicle and pedestrian
signal heads must be
shown on the plans.
2) The type, color and size of the lens for vehicle signal sections will
be as shown on the plans.
3) The size of the lens for pedestrian signal sections will be as shown
on the plans.
4) The door of each housing case will be one piece and will accommodate
the lens size
shown on the plans.
5) Mounting attachments will be as shown on the plans.
6) Signal heads will be assembled and mounted as shown on the the plans.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Pedestrian Signal Section (Type Specified) (Size
Specified)" |
EA |
2) |
"Vehicle Signal Section (Type Specified) (Size
Specified)" |
EA |
3) |
"Back Plate (Type Specified) (Size Specified)" |
EA |
4) |
"Louver (Type Specified) (Size Specified)" |
EA |
REFERENCE ITEMS
None
Go to Top
684 - TRAFFIC SIGNAL CABLES
SPECIFICATION REQUIREMENTS
1) The sizes, types, lengths and details for the installation of traffic
signal cables must be
shown on the plans.
2) This is a plans quantity measurement Item.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Traffic Signal Cables (Type Specified) (Size Specified)" |
M |
REFERENCE ITEMS
None
Go to Top
686 - TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL)
SPECIFICATION REQUIREMENTS
1) The types and sizes of the traffic signal pole assemblies must be
shown on the plans.
2) The location of the traffic signal poles must be shown on the plans.
3) Fabrication, welding and erection details must be shown on the plans.
4) The design wind speed for the traffic signal pole assemblies must be
specified on the plans.
5) For optional pole designs, the pole assemblies will be compatible
with the foundation
details, signal heads and other attachments shown on the
plans.
6) Foundations for the traffic signal pole assemblies will be
constructed to the details shown
on plans and will be paid for under Item 656.
7) Shafts for poles and mast arms may be round or octagonal and will be
tapered as shown
on the plans.
8) Anchor bolts will be oriented as shown on the plans.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Traffic Signal Pole Assemblies (Steel) (Types Specified) (Size
Specified)" |
EA |
REFERENCE ITEMS
(441, 442, 445, 449)
Go to Top
688 - TRAFFIC SIGNAL DETECTORS
SPECIFICATION REQUIREMENTS
1) The sizes, types and details for the installation of traffic signal
detectors must be shown
on the plans.
2) A pedestrian push button sign will be mounted near each push button
as shown
on the plans.
3) The locations, configurations, wire colors and number of turns for
the vehicle detectors
will be shown on the plans.
4) Sealant for the vehicle detector loops will be as shown on the plans.
5) Conduits will be placed between the pavement and ground box as shown
on the plans.
6) This is a plans quantity measurement Item.
OPTIONAL REQUIREMENTS
None
|
PAYMENT DESCRIPTION |
UNITS |
1) |
"Vehicle Detectors (Size Specified) (Type Specified)" |
M |
2) |
"Pedestrian Detectors (Size Specified) (Type Specified)" |
EA |
REFERENCE ITEMS
(682)
Go to Top |