| 2004 Standard Specifications Book
Last Updated (10/18/2004)
This document is provided for information only and is not to
be used for bidding or contract purposes.
Click
here to return to Index Page
DIVISION VI - LIGHTING AND SIGNING (Items 643 to
658)
Table of Contents
ITEM NO. - TITLE AND REQUIREMENTS
643 - SIGN IDENTIFICATION
DECALS
SPECIFICATION REQUIREMENTS
None
PAYMENT AND MEASUREMENT
Subsidiary to the various bid items in
the contract.
REFERENCE ITEMS
None
Go
to Top
644 - SMALL ROADSIDE SIGN SUPPORTS AND
ASSEMBLIES
SPECIFICATION REQUIREMENTS
1) Show the location and types of roadside sign assemblies on
plans.
2) Show the details for
fabrication and erection of small roadside sign assemblies on plans.
3)
The foundations for
the small roadside sign supports are subsidiary to this
item.
4) Show the lengths of each sign
support and the sign mounting heights on
plans.
5) Show the
type, spacing, orientation and projection above the finished grade
of stub posts on
plans.
6) Show the torque of the connection bolts on plans.
7) The removal and relocation of small roadside sign supports and
assemblies include signs, sign supports and
foundation.
8) Show the locations of the
existing roadside sign assemblies to be removed or relocated on plans.
9) Show
any
sign components that are removed and are to be reused
on plans.
10) Show any sign components that are removed and are
to be salvaged and become property of the state on
plans.
11) Use the following Statewide Standard Details Sheets
for the installation details of small roadside sign
assemblies:
|
SMD (GEN) |
Sign Mounting Details General Notes and Details |
|
SMD (SLIP-1, 2, 3) |
Sign Mounting Details Triangular Slipbase System |
|
SMD (TWT) |
Sign Mounting Details Thin Wall Tube |
|
SMD (FRP) |
Sign Mounting Details Fiberglass Reinforced Plastic
Post |
| PAYMENT DESCRIPTION |
UNITS |
| 1) "INS SM RD SN SUP & AM (Type Specified)" |
EA |
| 2) "REMOVE SM RD SN SUP & AM" |
EA |
| 3) "RELOCATE SM RD SN SUP & AM (Type
Specified)"
|
EA |
REFERENCE ITEMS
(421), (440), (441), (442), (445), (634),
(636), (643), (656)
Go
to Top
647 - LARGE ROADSIDE SIGN SUPPORTS AND
ASSEMBLIES
SPECIFICATION REQUIREMENTS
1) Show the locations of the large roadside sign supports must be shown on
plans.
2) Show the types and sizes of
the large roadside sign supports must be shown on
plans.
3) Show the details for the
fabrication and erection of the steel supports used for large
roadside sign supports must be shown on
plans.
4) Show the material for
perforated fuse plates and the ultimate tensile strength must be
shown on plans.
5) Show the lengths of
each sign support and the sign mounting heights must be shown on
plans.
6) Show the type,
spacing, orientation and projection of stub posts on
plans.
7) The upper post sections
will be connected to the stub post sections by bolts or other
connection devices as shown on
plans.
8) Show the torque of the connection bolts on plans.
9) Pay
for the foundations of the large roadside sign supports under Item
416.
10) The removal and relocation of large roadside sign
supports and assemblies include signs, sign supports and
foundation.
11) Show the locations of the existing roadside sign
assemblies to be removed or relocated on
plans.
12) Show any sign components that are
removed and are to be reused on plans.
13) Show any sign components that are removed and are to be salvaged and
become property of the state on the
plans.
14) This is a plans quantity measurement
item.
15) New drilled shaft foundations will be paid for in
accordance with Item 416, “Drilled Shaft Foundations.” New signs
will be paid for in accordance with Item 634, “Plywood Signs,” or
Item 636, “Aluminum Signs.”
16) Use the following Statewide
Standard Details Sheets for the installation details of
large roadside sign supports and assemblies:
|
SMD (2-1, 2, 3, 4, 5) |
Sign Mounting Detail Large Roadside Sign
Structures |
| PAYMENT DESCRIPTION |
UNITS |
| 1) "INSTALL LRSS (Type Specified)" |
LB |
| 2) "REMOVE LRSA" |
EA |
| 3) "RELOCATE LRSA" |
EA |
REFERENCE ITEMS
(421), (440), (441), (442), (445), (643)
Go
to Top
650 - OVERHEAD SIGN SUPPORTS
SPECIFICATION REQUIREMENTS
1) Show the location of the overhead sign support structures
on plans.
2) Show the types, span
lengths and vertical clearances of the overhead sign supports on plans.
3) Show
the details
for the fabrication and erection of overhead sign supports on plans.
4) Show
the details of concrete overhead sign support columns and/or spans on
plans.
5) Pay for the foundations of the
overhead sign supports under Item
416.
6) Show the locations of the
existing overhead sign supports to be removed or relocated on plans.
7) Show
any components
that are removed and are to be reused on
plans.
8) Show any components that are
removed and are to be salvaged and become property of the state on plans.
9) The span
lengths will be the design span lengths shown on the plans rounded
up to the next 5 ft. increment.
10) New drilled shaft
foundations will be paid for under Item 416, “Drilled Shaft
Foundations.” New signs will be paid for under Item 636, “Aluminum
Signs.” New sign lights will be paid for under Item 652, “Highway
Sign Lighting Fixtures.” New sign walkways will be paid for under
Item 654, “Sign Walkways.”
11) Use the following Statewide
Standard Details Sheets for the installation details of
overhead sign supports:
|
OSB’s |
Overhead Sign Bridge Details |
|
HOSB’s |
High Level Overhead Sign Bridge Details |
|
COSS |
Cantilever Overhead Sign Supports |
|
HCOSS’s |
High Level Cantilever Overhead Sign
Supports |
| PAYMENT DESCRIPTION |
UNITS |
| 1) "INS OH SN SUP (Span Length and Type
Specified)" |
EA |
| 2) "RELOCATE EXISTING OVERHD SIGN SUP" |
EA |
| 3) "REMOVE OVERHD SIGN SUP" |
EA |
REFERENCE ITEMS
(416), (420), (421), (441), (442), (445), (449),
(618)
Go
to Top
652 - HIGHWAY SIGN LIGHTING
FIXTURES
SPECIFICATION REQUIREMENTS
1) Show the locations of highway sign lighting fixtures on
plans.
2) New conduit will be paid
for under Item 618, “Conduit.” New electrical conductors will be
paid for under Item 620, “Electrical Conductors.” New electrical
Services will be paid for under Item 628, “Electrical
Services.”
3) Use the following
Statewide Standard Details Sheets for the installation
details of highway sign lighting fixtures:
|
SL(MV) |
Mercury Vapor Sign Lighting Fixture |
|
SL(1) |
Sign Lighting Electrical Details |
| PAYMENT DESCRIPTION |
UNITS |
| 1) "HWY SIGN LIGHT FIXT (Type
Specified)" |
EA |
| 2) "REMOVE HWY SIGN LIGHT FIXT" |
EA |
REFERENCE ITEMS
(616), (618), (620)
Go
to Top
654 - SIGN WALKWAY
SPECIFICATION REQUIREMENTS
1) Show the location of the sign walkway on
plans.
2) Show the width, length and
type of sign walkway on
plans.
3) Show the details of the sign walkway fabrication and
erection on
plans.
4) Show any components that are
removed and are to be salvaged and become property of the state on plans.
5) This is a
plans quantity measurement item.
6) Use the following Statewide Standard Details Sheets for the
installation details of sign walkways:
|
SWW(1) |
Sign Walkway and Handrail |
|
SB(SWL-1) |
Support Bracket for Signs, Walkway and
Lights |
| PAYMENT DESCRIPTION |
UNITS |
| 1) "SIGN WALKWAY (Width Specified) (Type
Specified)" |
LF |
| 2) "REMOVE SIGN WALKWAY" |
EA |
REFERENCE ITEMS
(441), (445)
Go
to Top
656 - FOUNDATIONS FOR TRAFFIC CONTROL
DEVICES
SPECIFICATION REQUIREMENTS
1) Show the locations of the concrete foundations on
plans.
2) Show the types of the concrete
foundations on
plans.
3) Use the following Statewide
Standard Details Sheets for the installation details of
foundations:
|
TS-FD |
Traffic Signal Pole Foundation |
|
TS-CF |
Traffic Signal Controller Slab and Base |
|
SMD (SLIP-1) |
Sign Mounting Details Triangular Slipbase System |
|
SMD (TWT) |
Sign Mounting Details Thin Wall Tube |
|
SMD (FRP) |
Sign Mounting Details Fiberglass Reinforced Plastic
Post |
PAYMENT AND MEASUREMENT
Subsidiary to the various bid items in
the contract.
REFERENCE ITEMS
(400), (416), (420), (421), (432),
(440), (441), (442), (445), (447), (449), (618)
Go
to Top
658 - DELINEATOR AND OBJECT MARKER
ASSEMBLIES
SPECIFICATION REQUIREMENTS
1) Show the locations of the delineators and object marker assemblies on plans.
2) Show
the locations of the barrier reflectors on plans.
3) Show
the color and type of
reflector unit(s) for the delineator and/or object marker assemblies on plans.
4) Show
the height of the winged
channel posts and flexible delineator posts on plans.
5) Show
the length and mass of the winged channel post on
plans.
6) Show the minimum embedment
depth for the winged channel posts on
plans.
7) Show the locations of the
delineator and/or object marker assemblies to be removed on plans.
8) Show
a note on plans to notify the contractor that posts which are deemed
by the engineer to be salvageable will be removed so that they will
not be damaged by the contractor’s
forces.
9) Removal of delineators
or object markers is subsidiary to this item, unless otherwise shown
on the plans.
10) This is a plans quantity measurement
item.
11) Use the following Statewide Standard Details Sheets for the installation details of delineators and object
markers:
|
D&OM (1) & (2) |
Delineators & Object Markers |
|
D&OM (VIA) |
Delineators & Object Markers for Vehicle Impact
Attenuators |
| PAYMENT DESCRIPTION |
UNITS |
| 1) "INSTL DEL ASSM (Type
Specified) (Color Specified)" |
EA |
| 2) "INSTL OM ASSM (Type
Specified) (Color Specified)" |
EA |
| 3) "REMOVE DEL OR OM ASSM" |
EA |
REFERENCE ITEMS
(445)
Go
to Top
|
