2004 Statewide Special Specifications
(Items 1000 to 3999)
Last Updated (05/23//2008)
This document is provided for information only and is not to be used for
bidding or contract purposes.
Click here to return to Index Page
Table of Contents
NO. TITLE AND REQUIREMENTS
1003 - Landscape Boulders
SPECIFICATION REQUIREMENTS
1) Show material of rock and sizes on the plans.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Landscape Boulders |
TON, EA |
REFERENCE ITEMS
None
Go to Top
1011 - Compost/Mulch Filter Berm
SPECIFICATION REQUIREMENTS
1) Show location for furnishing, placing and removing compost filter berms or
mulch filter berms on the plans.
2) Removal of accumulated sediment deposits will be measured and paid
for under Item 506.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Compost Filter Berm |
CY |
| 2) Mulch Filter Berm |
CY |
REFERENCE ITEMS
(161)
Go to Top
1012 - Transplant Plant Material
SPECIFICATION REQUIREMENTS
1) Show location for transplanting plant material on the plans.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Transplant Plant Material |
EA |
| 2) Transplant Plant Material (Type Specified) |
EA |
REFERENCE ITEMS
None
Go to Top
1013 - Trash Receptacles
SPECIFICATION REQUIREMENTS
1) Show location and materials for trash receptacles on the plans.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Trash Receptacle |
EA |
REFERENCE ITEMS
None
Go to Top
1014 - Landscape Amenity
SPECIFICATION REQUIREMENTS
1) Show location, materials, and construction methods for landscape amenity on the plans.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Landscape Amenity |
EA |
| 2) Landscape Amenity (Type Specified) |
EA |
REFERENCE ITEMS
None
Go to Top
1016 - Loose Aggregate for Groundcover
SPECIFICATION REQUIREMENTS
1) Show location, materials, and construction methods for installing loose
aggregate for groundcover on the plans.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Loose Aggregate for Groundcover |
CY |
| 2) Loose Aggregate for Groundcover (Type Specified) |
CY |
REFERENCE ITEMS
None
Go to Top
1018 - Tree Protection
SPECIFICATION REQUIREMENTS
1) Show location for placement of tree protection.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Tree Protection |
AC, EA |
REFERENCE ITEMS
None
Go to Top
1068 - Loose Aggregate for Groundcover
SPECIFICATION REQUIREMENTS
1) Show location, materials, and construction methods for installing loose
aggregate for groundcover on the plans.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Loose Aggregate for Groundcover |
SY, CY |
REFERENCE ITEMS
None
Go to Top
2002 - Rubblizing Existing Concrete Pavement
SPECIFICATION REQUIREMENTS
1) Show limits of measurement on the plans.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Rubblizing Existing Concrete Pavement |
SY |
REFERENCE ITEMS
(247)
Go to Top
3002 - Thin Whitetopping (Concrete Overlay)
SPECIFICATION REQUIREMENTS
1) When shown on the plans, provide fibers.
2) When shown on the plans, mill the pavement surface to the depth specified on
the plans, in accordance with Item 354, Planing and Texturing Pavement.
3) Adjust the screed to provide an approved grade line and overlay thickness, as
specified on the plans.
4) When shown on the plans, achieve ride quality in accordance with Item 585,
Ride Quality for Pavement Surfaces, Type A.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Thin Whitetopping (Concrete Overlay) (Thickness
Specified) |
SY |
REFERENCE ITEMS
None
Go to Top
3035 - Blade Level-Up with Asphalt Concrete
SPECIFICATION REQUIREMENTS
1) Show on the plans the locations for asphalt
concrete level-up course or courses.
2) Show on the plans the locations to pick up or load material furnished by the
Department.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Blade Level-Up Limestone Rock Asphalt (Type, Grade, &
Surface Aggregate Classification Specified) |
SY, TON |
| 2) Blade Level-Up Hot-Mix Cold-Laid Asphalt Concrete
Pavement (Type, Surface Aggregate Classification, & Asphalt Binder
Specified) |
SY, TON |
| 3) Blade Level-Up Hot-Mix Asphalt (Type, Surface Aggregate
Classification and Binder Specified) (Contractor or State Specified) |
CY |
REFERENCE ITEMS
300, 320, 330, 334, 340
Go to Top
3043 - Raising and Undersealing Concrete Slabs
SPECIFICATION REQUIREMENTS
1) Show on the plans the locations for raising and
undersealing concrete slabs.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Raising and Undersealing Concrete Slabs |
LB |
REFERENCE ITEMS
None
Go to Top
3127 - Thin Bonded Permeable Friction Course (TBPFC)
SPECIFICATION REQUIREMENTS
1) Provide coarse aggregate with a minimum SAC as
shown on the plans.
2) When PG binder is specified, provide an asphalt
binder with a high temperature grade of PG 76 and low temperature grade as
shown on the plans in accordance with Section 300.2.J, Performance
Graded Binders.
3) When shown on the plans, use the type and rate of
additive specified.
4) Provide the specified type of material transfer device when shown on
the plans.
5) When shown on the plans, the Engineer will provide the mixture design.
| PAYMENT DESCRIPTION |
UNITS |
| 1) TBPFC (Membrane) (Type Specified) |
GAL, TON |
| 2) TBPFC (Asphalt) (Type Specified) |
TON |
| 3) TBPFC (Aggregate) (Type Specified) |
TON |
REFERENCE ITEMS
(300), (301), (320), (520), (585)
Go to Top
3142 - Ultra-Thin Bonded Hot Mix Wearing
Course (UTBHMWC)
SPECIFICATION REQUIREMENTS
1) When PG binder is specified, provide
an asphalt binder with a high temperature grade of PG76 and a low temperature
grade as shown on the plans, in accordance with Section 300.2.J., Performance Graded Binders.
3)
The plans may require or disallow specific mineral fillers.
4)
When shown on the plans, use the type and rate of additive specified.
5) When shown on the plans, the Engineer will provide the mixture design.
| PAYMENT DESCRIPTION |
UNITS |
| 1) UTBHMWC (Membrane) (Type
Specified) |
GAL, TON |
| 2) UTBHMWC (Asphalt) (Type Specified) |
TON |
| 3) UTBHMWC (Aggregate) (Type Specified) |
TON |
REFERENCE ITEMS
210, 300, 301, 320, 504, 585
Go to Top
3150 - Warranted Microsurfacing (WMS)SPECIFICATION REQUIREMENTS
1) Show on the plans the placement
location of
WMS with a contractor's warranty for 2 yr.
2) Must be used with special provision to Item 3 which requires the
Contractor to provide a warranty bond.
| PAYMENT DESCRIPTION |
UNITS |
| 1) Warranted Microsurfacing |
TON |
REFERENCE ITEMS
350
Go to Top
Click here to return to Index Page
|
