2014 English Special Provisions to Item 666 - Retroreflectorized Pavement Markings (All)


SP666-009  PDF  RTF   - For project 0000-00-000, 0913-00-116, 0915-00-257, 0919-00-085 in Bexar, Cass, DeWitt, Travis Counties. Update to Section 3.1., ''General Requirements.'' One-Time Use.
SP666-008  PDF  RTF   - For project 0009-04-075, 0047-04-036, 0081-05-051, 0095-03-107 in Collin, Dallas, Denton, Ellis, Kaufman, Navarro, Rockwall Counties. Amending SP0666-007 to include installation of Raised Profile Pavement Markings(Bumps) Only. One-Time Use.
SP666-007  PDF  RTF   - Revises standard Item 666 Sections 2.3, 4.4, 4.5, 4.5.1, 4.6 and Article 7. Required on all projects using retroreflectorized pavement markings beginning with the May 2018 letting. Replaces SP666-001 SP666-002 SP666-004 SP666-005 SP666-006 . Statewide Use.
SP666-006  PDF  RTF   - VOID - DO NOT USE. For project 0915-51-011 in McMullen County. Clarifies language (Type II beads are acceptable for work zone & transverse markings & symbols, retro requirements are for longitudinal lane-line markings only & are not required for contracts with less than 200,000' of striping or for call-out work, etc. Replaced by SP666-007 . One-Time Use.
SP666-005  PDF  RTF   - VOID - DO NOT USE. For project 6284-06-001, 6284-39-001, 6285-35-001, 6296-37-001 in Jefferson, Johnson, Tarrant Counties. Supplemented to include Measurement and Payment for Retroreflectorized Type I and Type II Pavement Markings Spot Striping. Replaced by SP666-007 . One-Time Use.
SP666-004  PDF  RTF   - VOID - DO NOT USE. For project 6283-63-001, 6300-24-001 in Bowie County. Type II markings must meet minimum retroreflectivity values for edgeline markings, centerline or no passing barrier-line, and lane lines when measured any time after 3 days, but not later than 10 days after application. Replaced by SP666-007 . One-Time Use.
SP666-002  PDF  RTF   - VOID - DO NOT USE. Provides for acrylic or epoxy sealer, or Type II markings when used as a sealer for Type I markings, will be measured by the foot; by each word, symbol or shape by any other unit shown on the plans. (2004 SP 666-008) Replaced by SP666-007 . Districtwide Use. Pharr District.
SP666-001  PDF  RTF   - VOID - DO NOT USE. Defines a patch as 1,000 LF and establishes a pay item for placement of reflectorized markers on patches. (2004 SS 666-035) Approved for CSJ 6308-67-01. Replaced by SP666-007 . Districtwide Use. Waco District.

2014 English Special Provisions by Item (All)
Specification Information
Search For a Special Provision or Specification