A welder must have a Steel Structures Welding Certification before working on field splices of beams and girders or other structural steel connections. A welder must be qualified before making the miscellaneous welds described in Texas' 2004 Standard Specifications for Construction and Maintenance of Highways, Streets, and Bridges, Item 448.
Welders certified under TxDOT Construction Bulletin C-6, "Qualification of Welders for Field Welding," (no longer in print) meet requirements in the 2004 specifications.
All welding for certification must be performed in the presence of testing lab personnel. The welder is responsible for all costs associated with testing required for certification. The certification remains in effect as long as the welder performs acceptable work for TxDOT as determined by the Bridge Division.available online.
TxDOT does not maintain a list of approved testing laboratories, which must have a Certified Welding Inspector (CWI) and an American Society for Nondestructive Testing (ASNT) Level II Examiner available to perform tests and interpret results. TxDOT is the final authority in case of disagreement between the testing lab and TxDOT.
Send all test results to the address listed below. TxDOT reserves the right to refuse to accept certification test results from laboratories that have not performed up to the standards of AWS and ASNT. In such cases, TxDOT may perform an audit of the testing laboratory to determine its acceptance.
Brian D. Merrill, P.E.
TxDOT - Bridge Division
Construction & Maintenance Branch
125 East 11th Street
Austin, TX 78701