Instructions on how to download forms can be found here: Online forms FAQ's.
| Test Procedure | Title | Archive | Form |
|---|---|---|---|
| Tex-200-F | Sieve Analysis of Fine and Coarse Aggregates | X | X |
| Tex-201-F | Bulk Specific Gravity and Water Absorption of Aggregate | X | X |
| Tex-202-F | Apparent Specific Gravity of Material Finer Than No.50 (300 um) Sieve | X | |
| Tex-203-F | Sand Equivalent Test | X | |
| Tex-204-F | Design of Bituminous Mixtures | X | X |
| Tex-205-F | Laboratory Method of Mixing Bituminous Mixtures | X | |
| Tex-206-F | Compacting Specimens Using the Texas Gyratory Compactor (TGC) | X | |
| Tex-207-F | Determining Density of Compacted Bituminous Mixtures | X | X |
| Tex-208-F | Test for Stabilometer Value of Bituminous Mixtures | X | X |
| Tex-210-F | Determining Asphalt Content of Bituminous Mixtures by Extraction | X | X |
| Tex-211-F | Recovery of Asphalt from Bituminous Mixtures by the Abson Process | X | |
| Tex-212-F | Determining Moisture Content of Bituminous Mixtures | X | |
| Tex-213-F | Determining Hydrocarbon-Volatile Content of Bituminous Mixtures | X | |
| Tex-215-F | Determining Asphalt Content of Rock Asphalt by Hot Solvent Extraction | X | |
| Tex-216-F | Aggregate Retention Test | X | |
| Tex-217-F | Determining Deleterious Material and Decantation Test for Coarse Aggregates (Bituminous Mixture) | X | X |
| Tex-220-F | Determining Percentages of White Rock Contained in Native Rock Asphalt | X | |
| Tex-221-F | Sampling Aggregate and Limestone Rock Asphalt (LRA) | X | X |
| Tex-222-F | Sampling Bituminous Mixtures | X | X |
| Tex-224-F | Flakiness Index | X | X |
| Tex-225-F | Random Selection of Bituminous Mixture Samples | X | X |
| Tex-226-F | Indirect Tensile Strength Test | X | X |
| Tex-227-F | Theoretical Maximum Specific Gravity of Bituminous Mixtures | X | X |
| Tex-228-F | Determining Asphalt Content of Bituminous Mixtures by the Nuclear Method | X | |
| Tex-229-F | Combined Bituminous Mixture Cold-Belt Sampling and Testing Procedure | X | X |
| Tex-230-F | Laboratory Method of Mixing and Curing Polymer-Modified Slurry Seal (Microsurfacing) Mixtures | X | |
| Tex-231-F | Static Creep Test | X | |
| Tex-232-F | Mixture Design Procedure for Crumb Rubber Modified Asphaltic Concrete | ||
| Tex-233-F | Preparing Control Charts for Bituminous Mixture Paving Projects | X | X |
| Tex-235-F | Determining Draindown Characteristics in Bituminous Materials | X | |
| Tex-236-F | Determining Asphalt Content from Asphalt Paving Mixtures by the Ignition Method | X | X |
| Tex-237-F | Minimum Standards for Acceptance of a Laboratory for Hot Mix Testing | X | |
| Tex-238-F | Laser Diffraction Particle Size Distribution Analyzer | ||
| Tex-239-F | Asphalt Release Agents | X | |
| Tex-240-F | Determining Optimum Residual Asphalt Content (RAC) for Polymer-Modified Slurry Seal (Microsurfacing) Mixtures | X | |
| Tex-241-F | Compacting Bituminous Specimens Using the Superpave Gyratory Compactor (SGC) | X | |
| Tex-242-F | Hamburg Wheel-Tracking Test | X | X |
| Tex-243-F | Tack Coat Adhesion | X | |
| Tex-244-F | Thermal Profile of Hot Mix Asphalt | X | X |
| Tex-245-F | Cantabro Loss | X | X |
| Tex-246-F | Permeability or Water Flow of Hot Mix Asphalt | X | |
| Tex-247-F | Design of Thin Bonded Hot Mix Wearing CourseMixtures | X | X |
| Tex-248-F | Overlay Test | X | |
| Tex-249-F | Shear Bond Strength Test | X | |
| Tex-250-F | Ideal Cracking Test | X | |
| Tex-251-F | Obtaining and Trimming Cores from Bituminous Pavements | X | |
| Tex-252-F | Determining the Presence of Harmful Clays Using Methylene Blue | X | |
| Tex-253-F | IDEAL Rutting Test | ||
| Tex-280-F | Determining Flat and Elongated Particles | X |
Contact the Flexible Pavements Section at (512) 506-5841 for more information pertaining to the procedures in this series.